BLUECAST X5 FOR SLA/DLP 3d PRINTERS

• Custom synthesized oligomer by BlueCast, not available to the market, the patent is going to be applied.
• Excellent casting of small engravings both positive and negative
• its all jewelry needs from filigree to medals as well dental one
• Excellent for stones presetting
• Curing triggering tuned to maximize antialias smoothing
• No monomer inside, no smell
• No aggression on plastic parts (tested on PS, PMMA)
• No post-curing needed for casting
• No shrinkage
• Easy welding with wax, forget about pattern lost into investment
• Can be polished, engraved, drilled (post-cure is needed)
• Low viscosity, easier to recover uncured resin from models, easy to wash
• No preheating required
• Very little hygroscopic while liquid, no water absorption while printed
• Atoxic, solvent-free, very low phosphine content, very low skin irritant
• Cleaner burnout, 0,00% ash residual
• Suitable for fast burnout
• Full burnout also at a lower temperature (750 ??C)
• No expansion during burnout, sublimation starts at 130 ??C
• Excellent dimensional stability in time, no need to stock in cold/dark places

BlueCast X5 SLA specifications

• Castable: YES
• Castability: Extreme
• Print resolution: High
• Print Smoothness: High
• Resin color: Light Blue
• Post cleanup: Ethyl / IPA alcohol??5 min ??? Drying with compressed air
• Post UV cure: Not needed
• Post printing shrinkage: Negligible
• Content: 500 gr

INSTRUCTIONS

MSDS